Описание
The Thermo Scientific Pierce Coomassie Plus Protein Assay is a ready-to-use, reducing agent-compatible, improved Bradford assay reagent to quickly measure (A595nm) total protein concentration compared to a protein standard.
The Pierce Coomassie Plus Assay Reagent is a single, ready-to-use solution for measuring protein concentration. Simply add the reagent to equal volumes of samples and standards, mix and then measure the absorbance at 595nm. The assay costs only pennies per sample and can be performed in either test tube or microplate format. The Pierce Coomassie Plus Assay Reagent provides increased linearity of response and only half the protein-to-protein variability of other commercial Bradford assay formulations.
Features of the Coomassie Plus Protein Assay:
•
Colorimetric—measure with a standard spectrophotometer or plate reader (595nm)
•
Easy to use—single reagent; no working reagent preparation required
•
Fast—almost immediate color development; add, mix and read results
•
Broad range—detects protein concentration in the range 1 to 1500 µg/mL
•
Better—improved linearity and response-uniformity compared to traditional Bradford formulations
•
Flexible—microplate and cuvette protocols provided with the instructions and adaptable to several target working ranges
How the Coomassie Plus (Bradford) Assay Detects ProteinUse of coomassie G-250 dye in a colorimetric reagent for the detection and quantitation of total protein was first described by Dr. Marion Bradford in 1976. In the acidic environment of the reagent, protein binds to the coomassie dye. This results in a spectral shift from the reddish/brown form of the dye (absorbance maximum at 465nm) to the blue form of the dye (absorbance maximum at 610nm). The difference between the two forms of the dye is greatest at 595nm, so that is the optimal wavelength to measure the blue color from the coomassie dye-protein complex. If desired, the blue color can be measured at any wavelength between 575nm and 615nm. At the two extremes (575nm and 615nm) there is a loss of about 10% in the measured amount of color (absorbance) compared to that obtained at 595nm.
Development of color in coomassie dye-based (Bradford) protein assays has been associated with the presence of certain basic amino acids (primarily arginine, lysine and histidine) in the protein. Van der Waals forces and hydrophobic interactions also participate in the binding of the dye by protein. The number of Coomassie dye ligands bound to each protein molecule is approximately proportional to the number of positive charges found on the protein. Free amino acids, peptides and low molecular weight proteins do not produce color with coomassie dye reagents. In general, the mass of a peptide or protein must be at least 3,000 daltons to be assayed with this reagent. The assay is performed at room temperature and no special equipment is required. Simply add the sample to the tube containing reagent and the resultant blue color is measured at 595nm following a short room-temperature incubation. The coomassie dye containing protein assay is compatible with most salts, solvents, buffers, thiols, reducing substances and metal chelating agents encountered in protein samples.
For more information, see the article "
Chemistry of Protein Assays" in the Protein Methods Library.
Related ProductsPierce™ Coomassie Plus (Bradford) Assay KitPierce™ Detergent Compatible Bradford Assay Kit
For Research Use Only. Not for use in diagnostic procedures.
